| |
|
| 產品名稱： |
包覆機 |
| 產品規格： |
BF-300A曲面包覆機(冷膠) |
詳細描述：
設備用途及功能:
本機采用滾涂方式使用水性包覆膠、油性包覆膠將PVC膜、浸漆紙等貼覆于各種踢腳線、門窗套線、樓梯扶手等各種線條的表面，也可用于鋁合金、塑鋼、木塑等型材的表面包覆。各種角度、圓弧、溝槽、凹凸面、包邊等一次完成，并同時完成表面、側面、底邊的貼覆。加工效率高。
Function:
Through roll gluing,this machine works with watersolution or oilsolution glue to paste PVC and melamine paper on various kick boards, set lines of doors and windows, and the railing of the stairs.It can also wrap the surface of the duralumin,plastisteels, plasticwood and other moulding materials . It can work with various shapes, the curved, the grooved, the bulged and the rolled. the wrapping of surface, sides and bottom are accomplished effectively in a single process at the same time. 設備特性及主要配置：
1、底輪、壓輪全部采用鋁基硅橡膠輪，耐磨性好，不粘膠，使用壽命長。
2、涂膠輥配備刮刀使用，操作簡便，涂膠均勻。
3、傳動設計采用齒輪結構，運行平穩可靠。
4、卷紙機構用氣漲軸設計制造，調整使用方便靈活。
5、包覆速度手動無級調節，可在較大的范圍內調整。
6、預留基材工作站及熱融膠施膠站接口，可方便設備升級改造。
Features and Main installation::
1. The bottom wheels and the pressing wheels are all made by silicon rubber and aluminum. It is hard to abrade, and it is not sticky. So the life of the machine is very long. 2. The gluing roller is used with the drawknife. It is easy to operate.The glue can be very even after finishing. 3. The transmission system adopts the gear structure, which is safe and reliable.
4. The paperrolling system is made by airexpanded spindleit is convenient and flexible to use and regulate. 5. The wrapping speed is stepless manual-regulated, It can regulate in a large scale.
6. The interface for the timber workstation and the melted glue is prearrangement, which is convenient for the improvement.
技術參數（Technical Specifications）：
外形尺寸（Exterior size）： 4200mm×640mm×2100mm
涂膠方式（Way of gluing）： 滾涂水性、油性包覆膠 (Roll the water , the oil-solution glue)
涂膠寬度（Width of gule）： 300mm
最大加工高度(Maximum height of the work piece)：80mm
加工長度(Maximum length of the work piece)： 400mm~無限（Unlimit）
送料速度(Speed of working)： 2~80m/Min
總功率(Generl Power)： 8kW
整機重量(Weight)： 1.8T
|
| |
|
|
返回到產品展示中心
